Double Glazed Door Lock Replacement
Double glazed door locks replacement may seem like a daunting task, but with the proper tools and step-by steps instructions, it's doable. Replacing your window lock can improve the energy efficiency of your office or home and provide additional security.
Take off the screw that holds the faceplate of your lock cylinder. Use a screwdriver to twist it to the left before removing the cylinder.
Replacement cylinders
Euro lock door cylinders or barrel locks can be found in almost all uPVC double glazed uPVC doors. They provide security and reliability and have been verified to function. A cylinder might require replacement due to a stolen or lost key, however it could also be due to age and corrosion. Cylinders are available in a range of styles, sizes and finishes to match your door. Depending on the requirements of your home you can pick between 3-star and 1-star cylinders. The cylinders are protected by BSI Kitemarks, which are certified for insurance.
Cylinder locks are based upon simple pin and barrel systems which have been in use for many years in almost all uPVC doors. The drawback to these types is that they are easily manipulated by burglars who use tools to "snap" them and gain access to your home. We recommend replacing your cylinders with anti-snap ones to safeguard against this popular method of burglary.
To take out the old cylinder, first open your door. Then, look for the screw that is located at the edge of the door between the outer handle & inner handle. The screw will usually be colored differently and will stand out among the rest. Using a screw driver undo the screw completely. If the screw isn't moving try applying 3 in 1 oil and letting it sit for around an hour. double glazed door lock replacement york www.repairmywindowsanddoors.co.uk might help, or you can chisel into the head of the screw in the direction of unscrewing to break it loose.
After removing the handle screws then loosen the cylinder by rotating it in any direction (the direction will depend on the side of your door the locking mechanism is on). Once the cylinder has become loose, pull it toward you and then remove it. Measure the cylinder's width and length prior to purchasing an alternative.
We offer a variety of full and half cylindrical cylinders and a variety of security cylinders that are rated for anti-snap resistance as well as anti-bump. These cylinders are BSI kitemarked and Secured by Design certified and offer the highest levels of physical security for your home.
Replacement handles
There are many colours and styles available when replacing handles on a uPVC door. The most important thing to remember is that the new handle fits properly. Both the screw size and keyhole size should be identical. The best method to verify is to follow our easy guide on how to measure for uPVC handles. This will enable you to take the most precise measurements and ensure that you purchase the right handle. It's also worth thinking about upgrading to a high security set of handles. This will make your uPVC door more secure and will stop thieves from opening the lock.
Most major uPVC handle manufacturers have handles that can be used in replacement for double-glazed doors. You can choose from a vast selection of lever and handles with different finishes from companies such as ERA, Avocet and Millenco. You can even choose the lever handle with a snib option for extra security.
Depending on your requirements you may need to replace the whole handle, or just the handle lever. This is often due to wear and tear, but can also be caused by a problem with the lock mechanism. If your lock system is malfunctioning you should contact a Locksmith. However, if you're only looking to replace the handle of the lock, you could do it yourself.
Once you've made your measurements then you can compare them to the sizes of replacement handles available on the market. The most common size is the 92pz handle however, there are also 70pz and 68pz handles for uPVC doors. The new handle must have a backset and a faceplate that are compatible. This will ensure that the screw holes are aligned correctly and won't damage the lock inside the door.
If you are replacing your door handles and you're looking to increase the security level, it's recommended that you choose a set of handles with the Sold Secure SS301 (or 2* Kitemark) seal. These handles are great because they have been approved by the police, and come with anti-drilling and anti-picking features.
Replacement faceplates
Door keeps and faceplates are your final protection against intruders, they signify to any would-be burglar that your home is secure and stop them dead in their tracks. They are important and should be purchased at a trusted hardware shop, whether in person or online. This will help you make sure you're buying an item of high-quality that will last for a long time and will shield your doors and windows from corrosion and damage as time passes.
It is essential to know the difference between a single-point uPVC locking system and multipoint uPVC one. They can be similar to apples and oranges. You'll need to choose the correct faceplate or backset in accordance with the type of lock you are installing. A 'backset' is the distance from the edge of the door to the middle of the handle or cylinder. A 'faceplate is the metal band that is used to cover the edges of the mechanism. These are the main factors that determine which parts are required for your new uPVC locking system. It's then a process of following the directions on how to install them!
Replacement locks
Based on your preference, there are different options available when it's time to replace the locks on uPVC doors. These locks are designed to resist forces and provide greater security for your home. There are uPVC multipoint locking systems that are suitable for commercial use. These are usually provided by trusted manufacturers, such as Fullex central door lock gearboxes as well as Gardinia doors locks made of uPVC.
When choosing a new lock for your window, you should be aware of the type of backset you require as well as the faceplate you require. To ensure that the lock is safe and secure and will fit correctly, make sure to match the backset and faceplate. If your lock has a spindle of 35mm and an a 35mm backset it is recommended to purchase a brand new uPVC handle with a gearbox that is compatible the Laird Saracen surelock.
Also, ensure the new lock you choose is compatible with the faceplate and handle hole size of your existing windows. This is essential to ensure seamless integration between the handle and the window lock.
After you have chosen a replacement lock and you are ready to install it in your window. It is a good idea to speak with your local locksmith in this process. They can help you find the right lock. It is also advisable to test the new lock.
In order to avoid this, you must replace your double glazed windows with a top-quality lock that is resistant to forced entry. This will help to protect your valuables from a burglary and keep your family safe. Replacing the window locks is a reasonable option that can increase the security of your property. However this process can be challenging if you are not familiar with the procedure. To finish the task with ease you must follow these steps carefully.